Applicable to Version 10 onwards
Yes, you can check whether Cyberoam’s On-Appliance Reporting is enabled or not.
To check the status of Cyberoam’s On-Appliance Reporting, follow the steps given below.
1. Logon to CLI Console (Telnet or SSH)
2. Choose option 4 – Cyberoam Console and press Enter
3. Execute the command – show on-appliance-reports
If the status of Local Reporting is “Off”, you can enable it by executing the command – set on-appliance-reports on
Document Version – 1.0 – 30/09/2011