HomeHome ArticlesArticles Most Popular ArticlesMost Popular Articles Most Helpful ArticlesMost Helpful Articles Request New ArticleRequest New Article
RSS Feeds
DrillDown Icon Table of Contents Back
 . . . . . . . . . . . . .
DrillDown Icon Version 9.x
DrillDown Icon How To
DrillDown Icon Troubleshooting
DrillDown Icon FAQ
DrillDown Icon Answers to your Needs
DrillDown Icon Anti Spam
DrillDown Icon Anti Virus
DrillDown Icon Authentication
DrillDown Icon Categorization
DrillDown Icon Deployment
DrillDown Icon DNS
DrillDown Icon Firewall
DrillDown Icon How to check packet drop on Cyberoam for specific IP address?
DrillDown Icon Is it possible to remove firewall rules?
DrillDown Icon When do I remove firewall rules from Telnet Console?
DrillDown Icon What will happen if I flush or remove firewall rules from Telnet Console?
DrillDown Icon How do I re-apply firewall rules after removing them?
DrillDown Icon Why servers placed in DMZ are not able to ping Cyberoam even after enabling ICMP Network service for DMZ from local ACL?
DrillDown Icon Why Port forward rule for mail server is working randomly when I configure multiple gateways?
DrillDown Icon What should be the ideal value for each flood under DoS Setting?
DrillDown Icon What is the difference between Drop and Reject actions?
DrillDown Icon From where can I add Alias?
DrillDown Icon Why I am not able to ping any of the alias IP addresses but able to ping the default IP address when I have assigned one def
DrillDown Icon How do I assign multiple IP address on WAN interface?
DrillDown Icon Is it possible to define custom zone?
DrillDown Icon How do I restrict access of Cyberoam Web Admin Console (GUI) to certain LAN users only?
DrillDown Icon My Skype call gets disconnected frequently . What can be the reason?
DrillDown Icon Hardware
DrillDown Icon Logs & Reports
DrillDown Icon Multiple Gateway - Load Balancing and Failover
DrillDown Icon Miscellaneous
DrillDown Icon Registration & Licensing
DrillDown Icon Report
DrillDown Icon Support
DrillDown Icon System
DrillDown Icon VLAN
DrillDown Icon VPN
DrillDown Icon Tech Notes
  Subscribe Print PreviewPrint Current Article and All Sub-Articles
 
What is the difference between Drop and Reject actions?
Drop action will silently discard the connection request i.e. without sending ‘ICMP port unreachable’ message to the source while Reject action will deny access and send ‘ICMP port unreachable’ message to the source.
Article ID: 197