Click ‘Apply’ button and the L2TP configuration will be added successfully.
Click ‘Add Members’ button to add user or user groups to L2TP members list. A pop-up window is displayed to select the users. You can also select multiple users or user groups who are to be allowed access through L2TP Connection.
Click ‘Apply’ button to add these users and user groups to the L2TP members list.
Step 3: Create L2TP Connection
Create L2TP Connection from VPN ® L2TP à Connection and click on “Add” button with the following values:
|
Parameters
|
Value
|
|
Name
|
Branch
|
|
Policy
|
Default L2TP
|
|
Action on VPN Restart
|
Respond Only
|
|
Authentication Details
|
|
Authentication Type
|
Preshared Key
|
|
Preshared Key
|
Specify the preshared key to be used
|
|
Confirm Preshared Key
|
Confirm the preshared key to be used
|
|
Local Network Details
|
|
Local WAN Port
|
PortB - 203.88.140.124
Select local server
|
|
Remote Network Details
|
|
Remote Host
|
*
Specify IP address of remote peer/host. Specify * for any IP address.
|
|
Allow NAT Traversal
|
Enabled
|
|
Remote LAN Network
|
Select IP addresses and netmask of remote network which is allowed to connect to the Cyberoam server through VPN tunnel.
|
|
Quick Mode Selectors
|
|
Local Port
|
1701
|
|
Remote Port
|
Specify Remote Port for TCP or UDP.
Enter ‘*’ as the value for Remote Port. The reason is that Apple devices try to connect from a higher range of port.
|
Note:
It is not necessary to define Local ID and Remote ID in L2TP configuration.
Step 4: Activate Connection
Go to VPN à L2TP à Connection and click on “Red” button under Active Status to activate the connection. Once the status is activated, button will be changed to green.
Apple iPad Configuration
Configure Apple iPad device with the following Configuration:
Step 1
Click on the main menu of iPad and Go to Settings --> General --> Network.
Step 2
Then Click on VPN à Add VPN Configuration and make sure to turn the VPN ON.
Enter the details as shown below:
|
Parameters
|
Value
|
|
L2TP
|
|
Description
|
Cyberoam iPad L2TP
|
|
Server
|
203.88.140.124
|
|
Account
|
cyberoam
|
|
Password
|
Enter password
|
|
Secret
|
Specify Preshared Key
|
Step 3
After the above steps has been performed, set the VPN Connection status to “ON” and the VPN connection will be connected.
Go to the Internet Browser on iPad to test whether the connectivity has been established or not.
Document Version:1.0-24/05/2011
