Articles Articles Most Popular Articles Most Popular Articles Most Helpful Articles Most Helpful Articles
Advanced Search
DrillDown Icon Table of Contents Back
 . . . . . . . . . . . . .
DrillDown Icon Product Literature
DrillDown Icon Best Practices & Policies
DrillDown Icon Protect Your Cyberoam Appliances from Power Fluctuations
DrillDown Icon Version 10.x
DrillDown Icon Version 9.x
DrillDown Icon How To
DrillDown Icon Troubleshooting
DrillDown Icon FAQ
DrillDown Icon Answers to your Needs
DrillDown Icon Anti Spam
DrillDown Icon Anti Virus
DrillDown Icon Authentication
DrillDown Icon Categorization
DrillDown Icon Deployment
DrillDown Icon In transparent (bridge) mode, why does Cyberoam need a gateway and an IP Address?
DrillDown Icon How do I use DHCP services of Cyberoam server when deployed in Bridge mode?
DrillDown Icon I have deployed Cyberoam in bridge mode, how do I change the deployment mode to route mode & vice versa?
DrillDown Icon Can I use Cyberoam as an Proxy server if deployed in Bridge mode?
DrillDown Icon How do I find out on which interfaces/ports the bridge is configured?
DrillDown Icon How to disable LAN/Hardware Bypass?
DrillDown Icon I placed Cyberoam server in bridge mode between LAN & ADSL router. Now my setup is LAN - Cyberoam in bridge mode - ADSL router.
DrillDown Icon How do I setup Cyberoam with existing proxy server and use Cyberoam for content filtering? My current setup is LAN > ADSL and p
DrillDown Icon From where can I update TCP MSS size?
DrillDown Icon Can I use Cyberoam as Proxy server?
DrillDown Icon What is the default TCP MSS size?
DrillDown Icon What is the default MTU value set in Cyberoam?
DrillDown Icon Why is it required to change MTU value of Cyberoam?
DrillDown Icon How do I adjust maximum transmission unit (MTU) value?
DrillDown Icon Can multiple subnets be assigned to the DHCP pool of Cyberoam?
DrillDown Icon Can Cyberoam act as a DHCP server to allocate dynamic IP addresses?
DrillDown Icon Under what circumstances should I enable LAN Bypass?
DrillDown Icon Why I am not able to ping the Router IP address from Cyberoam when Cyberoam is deployed in Bridge mode and Cyberoam’s external i
DrillDown Icon Why I am not able to access Internet from all the networks when Cyberoam is deployed as Bridge with the following configuration?
DrillDown Icon DNS
DrillDown Icon Firewall
DrillDown Icon Hardware
DrillDown Icon Logs & Reports
DrillDown Icon Multiple Gateway - Load Balancing and Failover
DrillDown Icon Miscellaneous
DrillDown Icon Registration & Licensing
DrillDown Icon Report
DrillDown Icon Support
DrillDown Icon System
DrillDown Icon VLAN
DrillDown Icon VPN
DrillDown Icon Tech Notes
DrillDown Icon Visio Stencils
DrillDown Icon Glossary
DrillDown Icon Product Technical Support
DrillDown Icon Compatibility
  Email This ArticlePrintPrint Current Article and All Sub-Articles
Rate Icon Rate Icon Rate Icon Rate Icon Rate Icon
 
How to disable LAN/Hardware Bypass?

Applicable to Version: 9.6.0 build 78 onwards

By default LAN/Hardware Bypass is enabled in Cyberoam.

Follow the below mentioned steps to disable LAN/Hardware Bypass:

  1. Login to CLI Console (Telnet or SSH)
  1. Choose Option 2 – System Configuration and press Enter
  1. Choose Option 8 – Disable LAN Bypass to disable LAN/Hardware Bypass.

Note:

  • LAN bypass is only supported in Bridge mode.
  • LAN bypass is only supported for 50ia and above models.

                                                                                                                           Document Version: - 1.0 – 12/08/2011
Article ID: 181
   Copyright © 2013 Cyberoam Technologies Pvt. Ltd.
All rights reserved.		 Knowledge Base Software
Powered By: NovoSolutions, Inc.