HomeHome ArticlesArticles Most Popular ArticlesMost Popular Articles Most Helpful ArticlesMost Helpful Articles Request New ArticleRequest New Article
RSS Feeds
DrillDown Icon Table of Contents Back
 . . . . . . . . . . . . .
DrillDown Icon Security Advisory - Heartbleed Vulnerability in OpenSSL
DrillDown Icon Best Practices & Policies
DrillDown Icon Protect Your Cyberoam Appliances from Power Fluctuations
DrillDown Icon Technical Library
DrillDown Icon Compatibility
DrillDown Icon Archives
DrillDown Icon Version 9.x
DrillDown Icon How To
DrillDown Icon Anti Spam
DrillDown Icon Anti Virus
DrillDown Icon Authentication
DrillDown Icon Blocking
DrillDown Icon Clients
DrillDown Icon Content filtering
DrillDown Icon Firewall
DrillDown Icon IPS
DrillDown Icon Logs & Reports
DrillDown Icon SNMP
DrillDown Icon System
DrillDown Icon Configure PPPoE on Cyberoam
DrillDown Icon Connect Cyberoam using SSH (Secure Shell)
DrillDown Icon Lease IP to Wireless Networks placed in DMZ using DHCP
DrillDown Icon How To - Configure Dynamic DNS in Cyberoam
DrillDown Icon Obtain Appliance CPU information
DrillDown Icon Obtain Appliance Memory information
DrillDown Icon Rollback to previous version
DrillDown Icon How do I change the Web Admin Console (GUI) from English to Chinese lanaguage
DrillDown Icon How do I change the Web Admin Console (GUI) from English to Hindi language
DrillDown Icon Configure NTP Time server to synchronize Cyberoam clock
DrillDown Icon Parent Proxy deployment scenarios
DrillDown Icon Cyberoam as a DHCP server
DrillDown Icon Setup Serial Console Connection using HyperTerminal
DrillDown Icon Deploy Cyberoam in Gateway mode
DrillDown Icon Backup and Restore Cyberoam Configuration
DrillDown Icon Upgrade Cyberoam
DrillDown Icon Upgrade Cyberoam in HA
DrillDown Icon Registration
DrillDown Icon User
DrillDown Icon VPN
DrillDown Icon Intimation Regarding US New Daylight Saving Time Support
DrillDown Icon Verify the integrity check of Cyberoam Upgrade file using MD5 checksum
DrillDown Icon Troubleshooting
DrillDown Icon FAQ
DrillDown Icon Tech Notes
DrillDown Icon Visio Stencils
DrillDown Icon Product Technical Support
  Subscribe Print PreviewPrint Current Article and All Sub-Articles
 
Configure NTP Time server to synchronize Cyberoam clock

 

Applicable to Version – 9.5.8 onwards

Date and time can be set according to the Cyberoam’s internal clock or can be configured to synchronize internal clock with an NTP Time server. Cyberoam’s clock can be tuned to show the right time using global Time servers so that logs show the precise time and Cyberoam activities can also happen at a precise time.

NTP Time server can be configured either from:

1.       Network Configuration Wizard at the time of deploying Cyberoam
2.       Web Admin Console (after deployment)

Configure from Web Admin Console

  1. Go to System > Configure > Time Settings
  2. Select time zone according to the geographical region in which Cyberoam is deployed.
  3. Select “Synchronize with NTP server” if you want Cyberoam to get time from an NTP server. Specify NTP server IP address if you want to synchronize time with a specific NTP server else use the pre-defined NTP servers.
  4. Click Update button to save the configuration


 

Configure from Network Configuration Wizard

  1. Log on to Web Admin Console and click 
  2. Click  and follow the on-screen instruction.
  3. From Date & Time Configuration page, enable synchronization by clicking “Automatically Synchronization with NTP Server”
  4. Select “Use an internal list of pre-defined NTP Servers if you want to synchronize time using the pre-defined NTP servers
  5. Select “Synchronize with NTP Server” and specify NTP server IP address if you want to synchronize time with a specific NTP
  6. Save the configuration.
 
 
 
 
 
Document version - 1.0/26/10/2008
Article ID: 1151